Here is the tutorial to teach you how to upgrade the Whatsminer M50 seires firmware after you download it from our firmware page.
1. Visit our Whatsminer firmware page to download the correct Whatsminer M50 Firmware
2. Select firmware files
Click on the [Upgrade] button, click on the [Select Firmware] button and select the firmware file to upgrade in the bullet-box displayed, as follows:
3. Start to upgrade firmware
Select the firmware file, check the IP of the miner to be upgraded, and click on the [Start Upgrade] button to upgrade, as follows:
When the dialog box pops up, click the OK button. The status shows “success” and the upgrade is successful; otherwise, it shows “failure”.
